Boiler Magnet

• Saves fuel & reduces energy consumption
• CO emissions down to 20%
• Improved flame profile – improved burn efficiency
• Less soot - cleaner internal workings
• Less boiler maintenance required
• Guaranteed to save energy costs
• Real value - from only £30.00
• Suitable for domestic and commercial boilers

The principle benefit of this unit is 'saving gas or oil consumption' without any change in user habits. The effect of magnetizing gas and oil is clearly visible. Just check the flame profile through the site glass and the brightness and intensity of the flame is very noticeable. This shows that the fuel is being more completely used up and not wasted.

100mm long to fit 15mm pipework

* Saves fuel & reduces energy consumption
* CO emissions down by 20%

By improving the burn efficiency more heat is generated in less time so less gas is used - obviously this will save you money. The environmental benefit is this; as more of the fuel is completely burnt there is a reduction in CO of about 20%. As the ‘burn’ is cleaner the boiler is more efficient so maintenance work is reduced, service intervals therefore can be extended adding to the possible savings.

Fitting is very easy - the unit needs to be clamped to the copper gas supply line about one metre from the boiler itself. The ‘clamping’ itself takes a few seconds and once done the unit requires no further attention - ever - just watch the savings come through from the improved efficiency.

For best results, the gas pipe should be made from copper.

For more information please call us on 023 8058 2707.